Westructure Timber Frames construction-detail drawings.
Showing another thirty eight of the standards that are used by Westructure for construction.
An example of the drawings used as the standard for construction.
To see these methods being put into practice browse the PROJECTS page.
Place cursor on thumbnail images to see full size.


Use this detail for the installation of a eaves overhang to suit box soffit


Detail showing Barge, soffit and fascia


Detail showing breather membrane repairs


Detail showing the installation of DPC and batten around external openings


Detail showing restraint strap fixing


Detail showing installation of BTS4 wall ties


Detail showing firing piece installation if they are on the rafters


Detail showing firing piece installation if they are perpendicular to the rafters


Detail showing a typical Mortice and Tenon connection, fixed together using bolts


Detail showing a typical Mortice and Tenon connection, fixed together using dowels


Detail showing a typical Mortice and Tenon connection, fixed together using nails or woodscrews


Detail showing a typical TU connection


Detail showing a typical Half Lap connection, fixed together using bolts


Detail showing a typical Half Lap connection, fixed together using dowels


Detail showing a typical Biscuit connection


Detail showing a typical Stub Mortice and Tenon connection, fixed together using bolts


Detail showing a typical Stub Mortice and Tenon connection, fixed together using dowels


Detail showing a typical Stub Mortice and Tenon connection, fixed together using nails or wood screws


Detail showing lattice and mono truss installation


Detail showing Glulam and mono truss installation
.jpg)
.jpg)
Detail showing Glulam and mono truss installation (Overlapping at ridge)
.jpg)
.jpg)
Detail showing lattice and mono truss installation (Overlapping at ridge)


Detail showing valley rafter installation and noggins


Detail showing layboard installation


Detail showing timber fixing to the top surface of masonry


Detail showing timber fixing to the face of masonry if it is flat


Detail showing timber fixing to the face of masonry if it is sloped


Detail showing timber fixing directly to the face of masonry


Detail showing timber frame fixed down to slab with sunken stainless steel straps


Detail showing posi-joist rafters fixing at their base


Detail showing posi-joist rafters fixing at their ridge


Detail showing rooflight installation within posi-joist rafters


Detail showing rooflight installation winthin attic trusses


Use this detail to erect a gable end single skin dormer only


Use this detail to erect a hipped single skin dormer only


Detail showing scab pieces fixing to trusses using woodscrews

